1SBL181024R8410 ABB UA16-30-10RA 110V 50Hz / 110-120V 60Hz

ເລກສ່ວນ	1SBL181024R8410
ຍີ່ຫໍ້	ABB
ວົງ​ຈອນ​ຊີ​ວິດ	ເຄື່ອນໄຫວ
ວິ​ທີ​ການ​ຕິດ​ຕັ້ງ​	Surface mounting
ຄວາມຖີ່ຂອງການປ້ອນຂໍ້ມູນ	240 Pixel
ຮູບແບບຄື້ນໃນຫມໍ້ໄຟ	240 Pixel
ຄວາມຖີ່ຂອງການດໍາເນີນການຫມໍ້ໄຟ	240 Pixel
ເວລາເຕີມເງິນປົກກະຕິ	240 Pixel
ສີ	240 Pixel

ABB 1SBL181024R8410 ຂໍ້ມູນສະເພາະດ້ານວິຊາການ, ຄຸນລັກສະນະ, ພາລາມິເຕີ.

UA16..RA 3-pole contactors for capacitor switching, can be used in installations in which the peak current far exceeds 100 times nominal rms current. The contactors are delivered complete with their damping resistors and must be used without additional inductances (see table below). The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. Their electrical durability is 250 000 operating cycles for Ue < 500 V and 100 000 operating cycles for 500 V ≤ Ue ≤ 690 V. The UA..RA contactors are fitted with a special front mounted block, which ensures the serial insertion of 3 damping resistors into the circuit to limit the current peak on energization of the capacitor bank. Their connection also ensures capacitor precharging in order to limit the second current peak occurring upon making of the main poles. The insertion of resistors allows to damp the highest current peak of the capacitor when switching on, whatever its level. The UA..RA series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 1 built-in auxiliary contact - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.